Entry Points : TP3110 with voice unit
  

TP3110 with voice unit

A TP3110 ticket printer with a voice unit.

Global Settings

 
Parameter
Description
Name
Name of the unit.
Description
Description of the unit.
Template name
Name of the unit type template
Template version
Version of the unit type template
Expect Answer
When this check box is checked, you expect a response to commands.
Tickets on roll
Number of tickets on roll. Valid values between 1-3000. Default value is 2000.
 

Equipment Profile Level Settings

 
Parameter
Description
Name
Name of the unit.
Description
Description of the unit.
Type name
Name of the unit type.
Type description
Description of the unit type.
Unit id
Identification code of the unit.

Button 1-5

From the drop-down list of each Button, select the service that you want to be connected to that particular Button.
Date format on ticket
From the drop-down list, select the wanted date format. Available formats are:
YYYY-MM-DD; DD-MM-YY; MM-DD-YY; and Day Month Year.
Time format on ticket
From the drop-down list, select the wanted time format. Available formats are:
HH:MM; HH:MM am/pm; HH:MM:SS; and HH:MM:SS time zone (for example CEST).
Surface custom parameters
Which custom parameters should be available on the ticket.
The following parameters and strings to use in the Surface Editor application are available:
• Waiting customers
• Current waiting time
• Branch name
• Tickets left
Mark several of them by holding down Ctrl while clicking on them
Voiceunit Sub ID Code
Sub ID code created by the system, can be changed.
Message
Select the wanted message format from the drop-down list. Available formats are:
N.; Number N.; Number N. Counter C; Now serving ticket number N; and Now serving ticket number N. Please go to counter C.
Button delay
This is the minimum time that must elapse after a customer has pressed the button and until the next customer can get a ticket. Max: 60 seconds. Min: 0 seconds.
Tickets on roll
Number of tickets on roll.
Low ticket alarm
The number of tickets in the printer when the alarm is activated.
The ticket counter is restarted when the paper is fed into the printer mechanism.
Device Controller
From the drop-down list, select which Device Controller should be used.

Branch Level Settings

 
Parameter
Description
Default name
Default name of the unit.
Description
Description of the unit.
Unit Identifiers
The two columns of the table are:
• Name - Name of the unit, by default the name of the unit plus a sequential number, for example WebReception 5 or WebServicePoint 2. Can be changed to anything, so long as the name is unique, within the branch.
• Logic Id - An ID used in the connectors. The Logic Id continues with the next number in the sequence of the auto generated ID's within the unit type (e.g. Service Points, Entry Points, or Presentation Points). The number can be changed to anything, in the range of 1-9999, as long as it is unique within the Service Point, Entry Point, or Presentation Point.
Unit id
Identification code of the unit.
IP address
IP address of the ticket printer.

Button 1-5

The service that is connected to that particular Button.
VoiceUnit ID Code
Valid values between 1-125.
Balance
Available choices are: Left, Right, or Both.
Volume
Set the wanted volume of the voice unit here (0-7).
Message
Message format.
Device Controller
Name of Device Controller that is used.