Presentation Points : Information Display LED
  

Information Display LED

Information Display LED.

Global Settings

 
Parameter
Description
Name
Name of the Unit.
Description
Description of the Unit.
Template name
Name of the unit type template
Template version
Version of the unit type template

Equipment Profile Level Settings

 
Parameter
Description

Name

Name of the Unit.

Description

Description of the Unit.

Type name

Name of the Unit Type.

Type description

Description of the Unit Type.

Unit id

Identification code of the Unit.

Broadcast ID code

This is the Broadcast ID code for the displays. The same fonts will be loaded to all displays with the same ID Code. This makes it possible to load different fonts into different types of displays. All displays with the same Broadcast ID code will use the same fonts. Valid values between 1-125.

Font

Select the wanted display font from the drop-down list.

Font refresh interval

Time between refreshes (uploads) of the font file to the display (in minutes). Set to 0 to disable refreshes.

Message

From the drop-down list, select which message should be displayed on the LED display.

Text scroll direction

Select scroll direction from the drop-down list.

Text scroll speed

Select scroll speed from the drop-down list.

Device Controller

From the drop-down list, select the Device Controller that should be connected to this display.

Branch Level Settings

 
Parameter
Description
Default name
Default name of the Unit.
Description
Description of the Unit.
Unit Identifiers
The two columns of the table are:
• Name - Name of the unit, by default the name of the unit plus a sequential number, for example WebReception 5 or WebServicePoint 2. Can be changed to anything, so long as the name is unique, within the Branch.
• Logic Id - An ID used in the connectors. The Logic Id continues with the next number in the sequence of the auto generated ID's within the Unit Type (e.g. Service Points, Entry Points, or Presentation Points). The number can be changed to anything, in the range of 1-9999, as long as it is unique within the Service Point, Entry Point, Presentation Point, or Device Controller.
Unit id
Identification code of the Unit.
ID Code
Id code. Valid values between 1-125.
Broadcast ID code
This is the Broadcast ID code for the displays. The same fonts will be loaded to all displays with the same ID Code. This makes it possible to load different fonts into different types of displays. All displays with the same Broadcast ID code will use the same fonts.
Font refresh interval
Time between refreshes (uploads) of the font file to the display (in minutes).
Device Controller
Name of Device Controller that is used.